|
QUESTION Which command is used to verify the SDM installation on a Cisco router? A. show manager B. show running-config C. show flash D. show version E. show sdm Correct Answer: C Explanation:To test this scenario connect your computer to the lowest-numbered Ethernet port with a crossover cable and browse http:// and see if Cisco SDM launch point appears in the web browser. Note: If you have a Cisco 83x, 1701, 1710, 1711, or 1712 router, configure the computer to obtain an IP address automatically while if you have any other supported router, configure the PC with the static IP address 10.10.10.2. You can have another alternate way to use the CLI to confirm that Cisco SDM files are present in the router flash memory, enter show flash and search for the Cisco SDM file set; Presence of the file indicates that the router configuration supports Cisco SDM. |
| Sponsored Links: |
| << back |